5 Tyre Safety Tips Every Car Owner Should Know
When was the last time you checked your tyre wear? Can’t remember We don’t blame you, because that’s something drivers often assume. Panic starts when something goes wrong while driving. With the help of TyreHub, we’ve put together a useful article to teach you tyre safety. With this new knowledge, you’ll be better equipped to anticipate tire problems before they occur.
The four tyres of your vehicle are the things that make your vehicle operative. Unfortunately, proper maintenance of tyres is an important safety function that is often overlooked. The importance of maintaining your tyres properly cannot be overemphasized. Proper tyre inflation, walking depth, alignment and rotation can increase safe, more cost-efficient rides.
Check tyre pressure at least once a month
The tyre will lose pressure (air) over time and it is important that you check it at least once a month. Driving with low-inflated tyres is dangerous as it affects the operation of your car, worsens your fuel economy and can even damage the tyres. On the other hand, driving with over-flatted tyres is just as dangerous. Not only will your tyres have less grip and contact on the road, but they will wear out faster and are more likely to rupture.
To check your tyres at home, just buy a digital tyre gauge. Recommendations for tyre pressure can be found on the label on the driver’s door frame or in the vehicle owner’s manual. Tyre pressure should be checked when the tire is still “cold” – once a month, in addition to checking, they shall also be inspected before long trips or when carrying an extra load.
Inspect tyres regularly, especially before go long road trips
When you are checking tyre pressure or washing your car, do a physical inspection of your tyres. Don’t be afraid to get down on your hands and knees to observe you. Things to look for include cracks, knots, and punctured items in the tyre, such as nails, screws, glass, or stones. If one of these items punctures the sidewall of your tyre, your tyre will need to be replaced.
If you are going on a long road trip, check your tyre pressure and check your tyres before you leave home. It’s easier to inspect your tires in the safety and comfort of your own garage or driveway than on a sidewalk with a car zipping at 65mph or more.
If you experience a tyre malfunction while travelling, consider calling a tyre professional in the area to help replace or replace your tyre. If you have in Ahmedabad our tyre services partner helps you.
Rotate Your Tyres to Detain Uneven Wear
Tyre rotation is also necessary to achieve tread wear and maximum walking life. On front-wheel-drive cars, for example, most of the braking, steering, and driving forces are carried by the front tyres, which inevitably wear out very quickly.
A “cross-rotation pattern” – that is, moving the left-front tyre to the right-rear axle, moving the right-front tyre to the left-rear axle, etc. – Optimally balances walking wear and maximizes tyre life. That sequence can be done on any vehicle equipped with four non-directional tyres. Unidirectional tyres, designated by arrows on the sidewall, should rotate only from the front to the rear and from the rear, to the same side of the vehicle, so as not to change the direction of their revolution.
All-wheel-drive and four-wheel-drive vehicles are best suited for the same end-to-left and right-to-left rotation of the vehicle.
Maintain tyres in proper balance
Out-of-balance tyres can not only cause uneven tread wear and uncomfortable ride but can also bring excessive wear on the suspension and other components. Out-of-balance tyres can be found by heavy thumping, which is usually pronounced at highway speeds.
If such a situation occurs, adjust your tyres dynamically as soon as possible. Tyre balancing involves placing the weight in the right place on the bead or the inner circumference of the wheel. Tyres should always be balanced when first installed, and whenever they are remounted.
Don’t Overload Your Tyres
Overloading your tyres can be extremely dangerous as it can lead to blowouts. Even if your car’s maximum load is not exceeded, unevenly distributed loads can lead to overloading. To decide the maximum passenger and cargo load for your vehicle, check the vehicle owner’s manual or the load rating of your tyres. In addition, you should also spread the loaded weight throughout the cabin of the car. It is also best to remove any unnecessary weight from your car’s boots.